...

“NO TEAR OUT NEEDED”

San Jose Award Winning Concrete Coatings Company

39+ years in business providing pool deck resurfacing, driveway resurfacing, epoxy, waterproofing and polished concrete.

GET A FREE ESTIMATE

  • This field is for validation purposes and should be left unchanged.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service
 

The Armor Coatings Difference

We are proud to be San Jose’s, Silicon Valley’s and The Bay Areas finest decorative concrete coatings and concrete resurfacing provider. We value each and every customer and take pride in offering one-of-a-kind, customizable solutions. From concept to creation, we guide you along every step of the way. Let us make your vision become a reality. 

We work for residential, commercial, and industrial spaces – tackling each unique project and providing an artful installation.

This is our craft and your floor, driveway or deck is our canvas. Every day we strive to exceed expectations. Contact us for a free in-home consultation. Armor Coatings has been the most trusted name in the Bay Area and Silicon Valley for concrete resurfacing for nearly 4 decades.

Quality Craftsmanship

Over 39 Years of Experience

We are well-seasoned concrete coating contractors thanks to our decades of experience in the concrete flooring industry. Our experienced craftsmanship can be seen in the quality of our work.

Safe & Speedy Installation

The team follows strict safety guidelines & professionalism throughout the process. We put our best foot forward to finish your service as fast as we can without compromising quality.

Licensed, Bonded & Insured

Our team is trained in all things concrete so that the diagnosis and estimate are spot-on. We have the necessary qualifications that help to give you that little boost of assurance in us.

Cutting-Edge Materials & Equipment

Not only do we use top-notch equipment and the industry’s best products, but we emphasize being as minimally invasive to your home as possible. No yard campouts is what we’re saying

No Contracted-Out Workers

Armor Coatings’ workers have been with us for years. They are the face of Armor Coatings & have respect for the attention to detail that we require and have perfected their craft over the years.

CONTACT US

Hire the expert team at Armor Coatings today!

Our Concrete Coating Services

At Armor Coatings, We are a full service concrete coating provider for both residential and industrial concrete floors. We’ve been installing concrete coatings in San Jose and all over the Bay Area since the early 80’s so there are very few jobs we can’t handle. We offer alternatives to replacing your existing concrete and can transform old surfaces into a beautiful work of art. We even have the capability to handle vertical concrete surfaces.  For more in depth information on every service we provide, you can navigate to the pages below or call us anytime. We’re here to meet your concrete needs with our concrete contractors in San Jose.

How to Remove Concrete Sealer
San Jose Concrete Coating Company, residential pool with a concrete patio.

Decorative Concrete Coating Specialists

Decorative concrete coatings is Armor Coatings specialty. Let us show you our cutting-edge technology that makes concrete beautiful. Our products and services offer unlimited possibilities and can be installed in a short amount of time at an affordable cost.

We create beautiful concrete surfaces in driveways, walkways, patios, pool decks, floors, game rooms and many other high traffic areas. We install both residential and commercial floors in stores, offices, and restaurants hangars manufacturing plans and we transform the concrete surfaces in sometimes just a few days. 

Our holy trinity is the speed of each project, customization from start to finish, and budget-friendliness. We bring samples and designs to your project to make the process as simple as possible. We look forward to hearing from you.

 

Our Gallery of Quality Work

We take pride in our work and value every customer.
Providing custom work for home and business owners, no job is too big or too small.

View Our Final-Work Gallery

View Here

Common Questions About Concrete & Epoxy

Not always. It depends on the condition of the existing concrete. The underlying base for an overlay must be sound. If your concrete is heaving, has severe cracks, or is structurally unsound, you may need to consider other options besides coatings.

A typical residential project takes approximately 3 – 7 days to complete depending on several variables. Larger commercial jobs, such as commercial kitchens, can take a few weeks depending on the area of the floor.

Yes. There are many textures, patterns and color combinations available. Each installed coating is custom to each project. Our concrete staining, concrete polishing, and custom coatings can mimic certain types of stone and aggregate

When a coating is applied properly and well-protected by a sealer or coating, it should last a very long time. On floors, the use of a floor wax or polish can provide extra protection in high-traffic areas. The key is to reapply the sealer or wax if it begins to show some wear. Otherwise, wear patterns may begin to show, especially in colored surfaces. High foot traffic areas should always be accounted for. Regular maintenance will help prevent the degradation of any floor coating.

If we’re talking about outdoor concrete, the answer is simple: the elements. Weather will eventually wear down even the strongest concrete structures. High moisture content, heavy rains, poolside decks, fluctuating temperatures, and the scorching sun are things that you cannot control. 

If your concrete was not properly mixed to begin with (such as an improper ratio of water to aggregate), this may have caused parts of the structure to weaken. Cement shrinks when it dries, and if too much water was used in the mixing process, this can lead to cracking. Other methods, such as chemically-induced rapid curing concrete, can prevent some of the natural chemical reactions from occurring, which can also cause weakness. 

What we’re trying to say is that there are many different things that could have led to cracks in your concrete. We have the solution to remedy that concern.

A crack patch is applied over minor cracks. They are not intended to fix bad concrete. If you put an overlay directly over a cracked surface, the overlay is likely to crack as well. A small crack may be filled with epoxy; however, if the floor is severely damaged, concrete resurfacing and concrete coatings may not be able to remedy the situation.

  1. Pressure washing or grinding to remove dirt and grime from the surface.
  2. Repair cracks as needed
  3. Bond coat
  4. Installation of coating material
  5. Finish coat- Topcoat or sealer
  6. Curing- 48 to 72 hours depending on the system.

Simple. We’re family owned-and-operated and we never sub contract. We will not sacrifice the quality of work or workers that we provide for our service just because other competitors may look for shortcuts or for ways to pay their employees less. We has been in the industry for over 30 years, and all of our employees & concrete contractors have been with us for a very long time (ranging from 2-10 years). We love what we do and we know how to do it well. There is no tear out, no construction mess, no worries, and no problems. We get it done right the first time, every time.

It means that our process for concrete walkways, pool decks, driveways, steps, and other surfaces is not messy. We’re not going to bring in a demolition crew and tear out slabs of concrete and foundational building material for our concrete overlays. Existing concrete structure can be beautifully redone, stained, and waterproofed without construction or demolition mess.

Concrete staining is the process of either chemically-altering the surface of the concrete, or applying a topcoat layer to concrete to “stain”, or dye the concrete a certain color. There are acid-based stains and water-based stains, both of which will do the job when it comes to alternative concrete decoration. 

Acid based stains react with the lime content in the concrete to produce a chemical reaction, which permanently stains the concrete. Darker, reddish-brown hues are more common with acid based stains. 

Water-based stains essentially act as a topcoat and provide lighter, more atmospheric colors to concrete. These colors can range from translucent to opaque, and can be much brighter in color than acid based stains. All of the products we use are low in VOCs (volatile organic compounds).

Unlike poured cement and the hard, rough surface of regular concrete (think sidewalks and big cement blocks), polished concrete is incredibly smooth and can reflect light if used with the right sealers and topcoats. You can usually tell if concrete has been polished due to the tell-tale signs of the diamond-tipped concrete grinders that many concrete companies use. 

Depending on the type of grinder tip used, you can get incredibly bright, high-gloss finishes on your polished concrete.

The Concrete Coating Blog

NO OBLIGATION FREE QUOTE

  • This field is for validation purposes and should be left unchanged.

WE GET THE JOB DONE

We have been in the industry for 39 years; providing beautiful custom concrete overlays, decorative concrete staining and waterproofing for interiors and exteriors of homes and businesses.

Armor Coatings is run by true artists and we take the time to customize our products to suit our customer’s needs. From epoxy flooring to concrete artistry, Armor Coatings can transform any concrete pool deck, walkway, garage, or floor into something truly beautiful.

Copyright © 2024 Armor Coatings. All Rights Reserved. | Privacy Policy
Digital Marketing Services provided by The Digital Marketing Agency & Consulting Company LLC.

X
Call Now Seraphinite AcceleratorBannerText_Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.